|
| |
TM 5-4320-313-14
Figure 5-7. Fuel Injection Pump Testing.
b. Removal. (Refer to figure 5-8).
(1) Disconnect fuel pressure line (1).
(2) Remove hose (2) and hose (3). Install fuel shutoff clamp on hose (3).
(3) Remove hose connection (4) and packing (5). Discard packing (5).
(4) Remove vent valve (6) and packing (7). Discard packing (7).
(5) Move throttle control lever to the START position.
(6) Remove two nuts (8) and injection pump (9).
(7) Remove shim (10), spacer (11), and tappet (12).
Figure 5-8. Fuel Injection Pump Removal/Installation.
5-17
|
