|
| |
TM 5-4320-313-14
5-6. INJECTOR - Continued.
a. Removal. (Refer to figure 5-4).
The fuel injection system is extremely intricate and complex. All possible care should be taken in the
removal, test, and installation of these components. While handling the fuel injector, be extremely
careful not to touch the nozzle or the pin assembly on the nozzle end.
(1) Loosen fuel pressure line (1) at injection pump and remove from injector (5).
(2) Remove fuel return hose (2).
(3) Remove two nuts (3) and clamp (4).
(4) Remove injector (5) and washer (6). Discard washer (6).
Figure 5-4. Fuel Injector Removal.
5-12
|
