| |
TM 5-4320-313-14
4-13. FUEL PUMP.
This task consists of:
a. Removal
b. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics (item 1, appendix B)
Materials Required:
Packing, P/N 50129900
Equipment Conditions:
Pumping assembly shut down in accordance with paragraph 2-6.
a. Removal. (Refer to figure 4-6).
(1) Remove two screws (1), four flat washers (2), and two banjo fittings (3).
(2) Remove two nuts (4) and two flat washers (5).
(3) Remove fuel pump (6) and packing (7). Discard packing (7).
b. Installation.
NOTE
Ensure fuel pump cam follower is on top of cam when installing the fuel pump.
(1) Install new packing (7) and fuel pump (6) on engine and secure with two flat washers (5)
and two nuts (4).
(2) Install two banjo fittings (3), four flat washers (2), and two screws (1).
4-16
|