|
| |
TM 5-4320-313-14
4-12. FUEL FILTER.
This task consists of:
a. Removal
b. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics (item 1, appendix B)
Materials Required:
Rags, Wiping (item 8, appendix E)
Solvent, Cleaning (item 10, appendix E)
Equipment Conditions:
Pumping assembly shut down in accordance with paragraph 2-6.
a. Removal. (Refer to figure 4-4).
(1) Remove screw (1), flat washer (2), clamp (3), and two spacers (4).
NOTE
Drain hoses and fuel filter in a suitable container.
(2) Remove hose (5) and hose (6) from fuel filter (7).
(3) Remove fuel filter (7).
b. Installation.
(1) Position fuel filter (7) on engine with arrow pointing down and connect fuel hoses (6 and
5).
(2) Position clamp (3) on fuel hose (6).
(3) Install two spacers (4) between engine and clamp (3) and secure with flat washer (2) and
screw (1).
4-12
|
