|
| |
TM 5-4320-313-14
(2)Fill cold start assist cup with clean engine oil. To prevent engine lockup, carefully pour oil in the side of the
cup.
(3) Replace closing plug (1) into cold start assist (2) and press it in firmly.
(4) Start engine immediately using instructions in paragraph 2-6.
2-8. OPERATION IN EXTREME HEAT.
a. With engine stopped, frequently inspect cooling fins and blower ring to insure they are free of dirt. Clean as
necessary.
b. With engine stopped, frequently check engine oil level. Refer to paragraph 3-1 and add oil.
c. Check the air filter indicator. If red band appears in window of air filter indicator, notify unit maintenance.
2-9. OPERATION IN DUSTY OR SANDY AREAS.
a. Check the air filter indicator. If red band appears in window of air filter indicator, notify unit maintenance.
b. With the engine stopped, frequently inspect engine covers and blower ring to insure they are free of dirt. Clean
as necessary.
c. With engine stopped, frequently check engine oil level. Refer to paragraph 3-1 and add oil.
2-10. OPERATION IN RAIN, SALT AIR, OR HIGH HUMIDITY.
a. Shelter pumping assembly as much as possible from rain or sea spray.
b. Frequently wipe all components of the pumping assembly to dry moisture on unit.
c. Frequently wash and dry the pumping assembly' when you are operating in salt air or sea spray conditions.
2-11/(2-12 Blank)
|
