|
| |
TM 5-4320-313-14
5-13.
FRAME ASSEMBLY.
This task consists of:
a. Removal b. Cleaning c. Inspection d.Repair
e. Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics (item 1, appendix B)
Materials Required:
Rags, Wiping (item 8, appendix E)
Solvent, Cleaning (item 10, appendix E)
General Safety Instructions:
Well-ventilated area required.
Equipment Conditions:
Pump assembly removed in accordance with paragraph 5-4.
Engine assembly removed in accordance with paragraph 5-5.
a. Removal.Refer to figure 5-32 and remove frame assembly (1).
b. Cleaning.
WARNING
Do not breathe cleaning solvent P-D-680 vapors for long periods of time or use solvent near open
flames. To avoid illness, explosion, or fire, only use solvent in well-ventilated areas away from open
flames.
(1) Clean frame assembly with a rag and cleaning solvent.
(2) Allow to dry.
c. Inspection.
(1) Inspect frame assembly for broken welds.
(2) Inspect frame assembly for rust or corrosion.
d. Repair. Repair to frame assembly is limited to repairing broken welds and painting. Refer to TM 43-0139 for
painting instructions.
e. Installation.
(1) Place frame assembly (1) into position.
5-46
|
