|
| |
TM 5-4320-308-13
3-29. REPLACE/ADJUST THROTTLE CONTROL
This task covers:
a.
Removal
b.
Adjustments
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanics automotive
Engine shut down.
REMOVAL:
1
Remove nut (1), disc (2), and nut (3). Remove
lever (4).
2
Loosen nuts (5 and 6). Unscrew angular joint
(7) from adjusting screw (10).
3
Remove nut (8). Unscrew angular joint (9) from
adjusting screw (10).
4
Remove nut (11), disc (12), and spring washer
(13).
5
Remove hand lever (14), lever (15), and screw
(16).
6
Remove two screws (17), two discs (18), two
nuts (19), and two fixing flaps (20).
7
Remove two screws (21). Remove console (22)
and two discs (23).
INSTALLATION:
1
Install two discs (23) and console (22).
2
Install two screws (21). Tighten securely.
3
Install two screws (17), two discs (18), two nuts (19), and two fixing flaps (20).
4
Install screw (16) into console (22).
5
Install lever (15) on screw (16).
6
Install hand lever (14) on screw (16) and engage tang on hand lever (14) with notch on lever (15).
3-67
|
