|
| |
TM 5-4320-308-13
3-16. REPLACE NOZZLE ASSEMBLY
This task covers:
Cleaning/Inspection
INITIAL SETUP
Tools
Equipment
General Safety Instructions
Condition
Para
Condition Description
Well-ventilated area required.
2-1
Nozzle assembly removed
from storage container.
CLEANING/INSPECTION:
WARNING
Death or serious injury could occur if fuel is not handled carefully. Use in a well-ventilated area
away from open flame, arcing equipment, ignition sources, heaters, or excessive heat. Always
store fuel in proper, marked containers. DO NOT SMOKE.
Death or serious injury could occur if compressed air is directed against the skin. Do not use
compressed air for cleaning or drying unless the pressure is/has been reduced to 30 psi (2. 06
bar) or less. When working with compressed air always use chip guards, eye protection, and other
personal protective equipment
1 Clean all components with clean diesel fuel and
dry with compressed air.
2 Inspect all components for wear, cracks, leaks,
signs of deterioration, damaged threads, and
obvious damage. Replace nozzle assembly if
damaged.
3-39
|
