|
| |
TM 5-4320-308-13
5-4. REPAIR/REPLACE TIMING COVER AND CAMSHAFT
This task covers:
a.
Removal
c.
Disassembly
e.
Assembly
b.
Cleaning
d.
Repair
f.
Installation
INITIAL SETUP
Tools
Materials/Parts
Shop set, automotive repair,
Diesel fuel oil (Item 2, Appendix E)
field maintenance, basic
Equipment
Condition
Auxiliary bush, timing cover oil seal
Para
Condition Description
(30 x 47 mm)
666 075 00
3-26
Lift pump removed.
Extractor, cam follower spindle
4-15
Injection pump removed
666 324 00
4-16
Crank handle and gears re-
Mounting device, camshaft needle bearing
moved.
666 418 00
5-3
Connecting rod removed from
Punch, camshaft needle bearing
engine.
666 425 00
General Safety Instructions
Well-ventilated area required.
REMOVAL:
CAUTION
Lift both cam followers from camshaft when removing timing cover to prevent bending by cam points.
1 Remove six screws (1) and joints (2) and remove timing cover (3) and camshaft (13).
NOTE
Insertion of Allen screws in timing cover holes may aid in removal of timing cover.
2 Matchmark two teeth of camshaft gear and one tooth of crankshaft gear to make sure of proper alignment of
gearing when reinstalling timing cover.
5-10
|
