|
| |
TM 5-4320-308-13
4-17. INSPECT/REPLACE CYLINDER HEAD AND VALVE ASSEMBLY (Continued)
3
Remove screw (1) and pipe clip (2).
4
Remove two nuts (3) and two spring washers (4).
5
Lift cylinder head cover (5) off cylinder head.
6
Remove and discard gasket (6),
7
Remove four nuts (1) from four studs (2) and
remove rocker shaft (3) with rockers, lifting eye,
fuel tank bracket, and two air shields. Remove
deflector (4).
NOTE
Record thickness of gasket to aid in
selection of new gasket during installation.
8
Remove cylinder head (1) and gasket (2). Discard
gasket.
4-39
|
