|
| |
TM 5-4320-308-13
4-12. REPLACE ENGINE ASSEMBLY (Continued)
INSTALLATION:
WARNING
Death or serious injury could occur if unauthorized or unnecessary personnel are in the hoisting
area. Permit only personnel actually engaged in the hoisting operation to be near the unit and
hoisting equipment. All instructions for the hoisting operations must come from one authorized
person.
Death or serious injury to personnel or damage to equipment could occur from improper hoisting.
Hoist the load slowly to avoid tearing out lifting strap, slipping slings, or load shift. Do not jerk
the load or swing it from side-to-side when hoisting. This places additional stress on hoisting
components which can cause failure and loss of load. Be sure hoisting equipment is on solid
footing and is suitable for the size of the load. Watch boom angle and overhead clearance when
hoisting.
1
Attach lifting equipment. Lift and carefully lower engine assembly (5). Aline mounting holes on engine and engine
brackets.
2
Install four hex screws (2) and four spring washers (3) on each engine bracket (4). Tighten securely.
4-21
|
