|
| |
TM 5-4320-308-13
4-8. REPAIR NOZZLE ASSEMBLY
This task covers:
a.
Disassembly
c.
Assembly
b.
Cleaning/Inspection
INITIAL SETUP
Tools
Equipment
Condition
Shop set, automotive repair, field
Para
Condition Description
maintenance, basic
2-1
Nozzle assembly removed from
storage container.
Materials/Parts
General Safety Instructions
Diesel fuel oil (Item 2, Appendix E)
Well-ventilated area required.
DISASSEMBLY:
1
Remove dust cap (1) and coupler (2) from bushing (3). Remove dust cap from coupler.
2
Remove cap (4) from body (5).
3
Remove spring (6), upper poppet (7), lower disc holder (8), lower disc (9), lower disc washer (10), nut (11), stem
(12), and stuffing box (13) from body.
4
Remove packing nut (14) and packing gland (15) from body (5). Remove and discard packing (16).
5
Remove lever (17) by removing two pushnuts (18) and pin (19) from body (5).
6
Remove two cap chain links (20), chain (21), two drawbars (22), and compression spring (23) from cap (24) and
body (5).
7
Remove spout assembly (25) and nozzle strainer assembly (26) from body (5). Remove and discard preformed
packing (27).
8
Remove ground wire plug (28) and clip with screw (29) from cable (30).
4-13
|
