|
| |
TM 5-4320-308-13
4-4. SUCTION HOSE ASSEMBLY (Continued)
3
Inspect hose (1) for cracks, leaks, signs of deterioration, collapsed walls, and obvious damage. Replace hose if
damaged.
4
Inspect adapter (4), clamps (6, 7, 8, and 9), and coupler (5) for obvious wear or damage. Replace damaged
components.
DISASSEMBLY:
1
Remove adapter (4) and dust cap (2) by removing clamps (6 and 7) from hose (1). Remove dust cap chain from
adapter.
2
Remove coupler (5) and dust cap (3) by removing clamps (8 and 9) from hose (1). Remove dust cap chain from
adapter.
ASSEMBLY:
1
Install adapter (4) by sliding clamps (6 and 7) over hose (1) and inserting adapter into hose. Secure adapter with
clamps. Attach dust cap (2) to adapter.
2
Install coupler (5) by sliding clamps (8 and 9) over hose (1) and inserting coupler into hose. Secure coupler with
clamps. Attach dust cap (3) to adapter.
4-5
|
