|
| |
TM 5-4320-306-24
2-16. REPLACE/REPAIR CONTROL PANEL ASSEMBLY (Continued)
17
Install STARTER switch (25) through back of control panel (4).
18
Install nut and spring lockwasher (26) on STARTER switch (25).
19
Attach three tagged wires to STARTER switch (25) with two screws.
20
Install START/STOP switch (23) through back of control panel (4).
21
Install nut and spring lockwasher (24) on START/STOP switch (23).
22
Attach three tagged wires to START/STOP switch (23) with two screws.
23
Install OIL BY-PASS SWITCH (21) through back of control panel (4).
24
Install nut and washer (22) on OIL BY-PASS SWITCH (21).
25
Attach tagged wires to OIL BY-PASS SWITCH (21).
26
Carefully install pressure gage (PUMP DISCHARGE) (18) through front of control panel (4).
27
Install screws (19) and nuts and lockwashers (20).
28
Install bezel (17) and thumbscrew (16) on front of control panel (4).
29
Carefully install compound gage (PUMP SUCTION) (13) through front of control panel (4).
30
Install screws (14) and nuts and lockwashers (15).
2-61
|
