|
| |
TM 5-4320-306-24
2-13. TEST/REPLACE/REPAIR BATTERY CABLE ASSEMBLIES, BATTERIES, AND CHARGING RECEPTACLE
(Continued)
7
Place batteries (15) in battery box (16)
WARNING
Connect positive battery cables to battery first to prevent shocks and damage to other electrical system
components.
8
Make sure posts (5, 9, 13, and 14) and terminal
lugs (3, 7, and 11 ) are clean. Install positive
battery cable assembly (8) to positive battery
post (9) as shown on battery circuit plate.
Tighten nut (6) securely. Cover terminals and
posts with grease
9
Install negative battery cable assembly (4) to
negative battery post (5) as shown on battery
circuit plate. Tighten nut (2) securely. Cover
terminals and posts with grease.
10
Install jumper battery cable assembly (12) to
negative battery post (14) and positive battery
post (13) as shown on battery circuit plate.
Tighten nuts (10) securely. Cover terminals and
posts with grease.
11
Close battery box top (1). Be sure catches are
securely fastened over strikes.
2-40
|
