|
| |
TM 5-4320-306-24
4-10. REPLACE/REPAIR PISTON ASSEMBLY (Continued)
3
Insert connecting rod (4) into bottom of piston (3), and place piston on two flat wooden blocks.
4
Insert piston pin (2) into piston pin bore (9) and through small-end bushing (10) of connecting rod. Push pin in
until it contacts installed circlip (1) and stops. Make sure arrow (11) on top of piston (3) points toward pushrod
cover tube bores (12) (inlet and exhaust side).
5
Install second new circlip (1).
4-81
|
