|
| |
TM 5-4320-306-24
3-16. REPAIR TURBOCHARGER (Continued)
10
Check that piston rings (17) are not pressed out of grooves. Be sure piston ring gaps are offset through 90
degrees toward oil inlet.
11
Install preformed packing (16) on backplate (15).
12
Apply sealing compound to backplate (15) seaIing face and to screw (14) threads.
13
Install backplate (15).
14
Tighten screws (14) to 20.65 ft-lb. (28 Nm) torque.
3-78
|
