|
| |
TM 5-4320-306-24
3-8. REPLACE LUBE OIL COOLER/REPLACE LUBE OIL FILTER (Continued)
2 Remove bolts (1) and washers (2).
3 Thread cap screw/nut (3) out of the engine and
remove oil cooler (4).
4 Remove gasket (5) and duplex ring
INSPECTION:
Replace lube oil cooler if damaged.
INSTALLATION:
1 Install gasket (5) and duplex ring (6).
2 Secure oil cooler (4) in place with bolts (1) and washers (2) hand tight.
3 Aline oil cooler pipes, and apply hand pressure to compress duplex ring (6).
4 Tighten cap screw/nut (3).
5 Tighten bolts (1) and washers (2).
6 Install and secure banjo bolts and washers at both ends of injection-to-crankcase hose.
7 Install fuel injection and return lines in accordance with paragraph 3-12.
8 Fill the engine crankcase with oil in accordance with paragraph 2-1.
9 Install air cowling top and secure with three fasteners.
3-40
|
