|
| |
TM 5-4320-306-24
3-4. REPLACE/REPAIR PUMP ASSEMBLY (Continued)
8.
Position flywheel guards (10) on bearing housing (2).
9.
Install screws and lockwashers (9). Do not tighten.
10. Install screws (4), nuts (5), lockwashers (6), flat washers (7), and shims (8) Do not tighten.
11. Tighten screws (9) securely in a cross pattern.
12. Tighten screws (4) in a cross pattern.
13. Remove lifting device (3).
14. Install pipe plug (1) on pump assembly (2). Tighten securely.
15. Fill the engine crankcase with oil in accordance with paragraph 2-1.
16. Install discharge manifold assembly in accordance with paragraph 2-19.
17. Install suction assembly in accordance with paragraph 2-18.
3-16
|
