|
| |
TM 5-4320-306-24
3-4. REPLACE/REPAIR PUMP ASSEMBLY (Continued)
DISASSEMBLY
1.
Remove nuts (1) and lockwashers (2)
2.
Matchmark pump body (3) and seal housing (4) to aid in assembly.
Remove pump body (3) with studs (5).
3.
Remove and discard gasket (6).
4.
Remove wear ring (7) from pump body (3) and discard.
5.
Remove impeller (8).
6.
Remove shaft seal (9) spring and rotating seal half and discard Remove stationary seal half from seal housing and
discard.
7.
Remove shaft sleeve (10).
8.
Remove wear ring (11) from seal housing (4) and discard.
9.
Remove nuts (12) and lockwashers (13).
10. Remove seal housing (4).
11. Set bearing housing assembly (14) aside.
3-10
|
