|
| |
TM 5-4320-306-24
2-35. TEST/REPLACE ALTERNATOR, ALTERNATOR V-BELT PULLEY, AND FAN (Continued)
INSTALLATION:
1
Connect wire lead (6) which has a push-on connector Install voltage regulator (4) onto alternator (5) using three
screws (3)
2
Connect two wire leads (2) to alternator (5) as tagged during removal. Install two nuts (1).
3
Aline alternator (9) with front cover mounting hole. Support
alternator and secure with hex head bolt (11), damping
bushes (12), Washers (13), and nut (14) to alternator
mounting bracket (15) Tighten nut only hand tight
4
Install clamping plate (10) on alternator (9) with clamping
plate screw (7) and washer (8) Tighten only hand tight.
5
Install key (6) in shaft (1).
6
Install fan (5) onto shaft (1) over key (6) with fan blades
toward alternator (9)
7
Install alternator V-belt pulley (4) onto shaft (1) over key (6)
8
Install nut (2) and lockwasher (3) Tighten securely
2-124
|
