| |
TM 5-4320-306-24
2-33. REPLACE TURBOCHARGER AND EXHAUST (TURBINE) ELBOW
This task covers:
a. Removal
c.
Installation
b.
Inspection
INITIAL SETUP
Tools
Equipment
Condition
Shop equipment, automotive maintenance
Para
Condition Description
and repair, common no. 1
2-26
Air intake elbow removed
Tool kit, general mechanics automotive
2-28
Exhaust (pipe) elbow removed
Materials/Parts
General Safety Instructions
Lubricating oil (Item 10, Appendix C)
Unit cool
REMOVAL
WARNING
Handling hot exhaust system can cause severe burns. Allow
unit to cool before handling.
1
Unthread bolt (1) and remove two washers (2) and the bolt end of the turbocharger-to-filter lube oil pipe (3).
2
Remove two bolts (4), two washers (5), and gasket (6) from the turbocharger end of the pipe (3). Discard
gasket
3
Remove three screws (7), three washers (8), three rings (9), three pipe clips (10), and three end plates (11) to
remove pipe (3) from the engine
2-113
|