|
| |
TM 5-4320-306-24
2-28. REPLACE/REPAIR EXHAUST SYSTEM (Continued)
4.
Loosen nuts and remove clamp (1) and exhaust
elbow (2) from muffler outlet
5.
Loosen screws (3) on two mounting bands (4)
6.
Loosen nuts on two clamps (5 and 6) Slide clamp
(5) away from muffler (7) along exhaust pipe (8)
7.
Separate exhaust pipe (8) from muffler (7) intake
flange
8.
Slide muffler (7) from mounting bands (4) Remove
muffler (7)
9.
Remove clamps (5 and 6) and pull exhaust pipe (8)
from exhaust elbow (9)
10.
Remove mounting bands (4) by removing screws
(10) and washers (11)
11.
Remove muffler bracket (12) by removing bolts (13)
and lockwashers (14)
12.
Remove bolts and nuts (1) (three sets) that secure exhaust elbow flange (2) to turbine elbow (3)
13.
Remove exhaust elbow (4), flange washers, and gaskets. Discard gaskets as necessary
2-99
|
