|
| |
TM 5-4320-306-24
2-23. REPLACE ETHER START KIT (Continued)
REMOVAL:
1
Remove cylinder (1) by unscrewing from valve (2) Remove gasket (3).
2
Unscrew adapter (4) from air intake.
3
Remove two screws (5) Remove bracket (6) and valve (2).
4
Unscrew hose (7) from adapter (4) and valve (2).
INSPECTION:
1
Inspect hose (7) for cracks. Replace if damaged.
2
Inspect valve (2), cylinder (1), and adapter (4) for heavy corrosion, dents, or damaged threads Replace if
damaged.
INSTALLATION:
1
Install hose (7) by screwing into adapter (4) and into valve (2).
2
Install valve (2) and bracket (6) using two screws (5).
3
Install gasket (3) and screw cylinder (1 ) onto valve (2) hand tight Do not tighten the cylinder (1 ) more than hand
tight.
4
Install adapter (4) into air intake.
2-89
|
