| |
TM 5-4320-305-24
2-19. REPLACE/REPAIR DISCHARGE MANIFOLD ASSEMBLY AND
DISCHARGE ELBOW (Continued)
DISASSEMBLY:
1 Remove 12 cap screws (1), 12 lockwashers (2), and 12 nuts (3).
2 Remove flange (4) and gasket (5). Discard gasket.
3 Remove two nuts (6) and two lockwashers (7) from studs (8) on discharge elbow.
4 Remove gate valve (9), support bracket (10), and gasket (11). Discard gasket.
5 Remove remaining 10 nuts (12) and 10 lockwashers (13) from studs (14) on check valve assembly (15).
6 Remove discharge elbow (16) and gasket (17). Discard gasket.
2-78
|