|
| |
TM 5-4320-305-24
2-15. TEST/REPLACE/REPAIR ELECTRICAL SYSTEM ASSEMBLY (Continued)
15
Tag wires (1) below bottom grommet (2) to aid in
removal. Disconnect wires from terminal block (3)
on control panel back (4).
16
Remove wires (1) through bottom hole (5) on
control panel back (4).
TESTING/INSPECTION:
Test wires and cables for continuity and inspect for broken, burred, damaged, or frayed wiring. Check for loose or
damaged connectors on wires and cables.
INSTALLATION:
1
Replace wires, cables, and connectors if broken or
damaged.
2
Connect wires (1 and 3) to alternator (2).
NOTE
If wires could not be removed but are damaged, replace associated component
and wiring.
2-50
|
