|
| |
TM 5-4320-305-24
2-14. REPLACE/REPAIR BATTERY BOX ASSEMBLY (Continued)
INSPECTION/REPAIR:
1
Inspect battery box (4) and battery box top (6) for minor dents, rust, acid corrosion, or other damage. Repair
minor dents, rust, or corrosion. If damage is major or acid has corroded the battery box (4) extensively, replace it.
If there are holes in box (4) and/or top (6), replace as required.
NOTE
If weld nuts in trailer frame are stripped, notify direct support.
2
Inspect vent tube (7) for blockage, corrosion, or damage. Replace if blockage cannot be cleared.
3
Inspect hinge, strikes (8), and catches (9) for damage, rust, acid corrosion, or malfunction. If hinge, strikes, or
catches do not function properly, notify direct support.
INSTALLATION:
1
Position battery box (4) over mounting holes on trailer assembly (5).
2
Install screws (1), washers (2), and nuts (3). Tighten securely.
2-44
|
