|
| |
TM 5-4320-305-24
4-9. REPLACE/REPAIR CYLINDER ASSEMBLY
This task covers:
a. Removal
c. Repair e. Installation
b. Cleaning/Inspection
d. Adjustment
INITIAL SETUP
Tools
Equipment
Condition
Shop set, automotive repair, field
Para
Condition Description
maintenance, basic
Tool kit, master mechanics
3-19
Cylinder head removed from
Hone with 120-grit stones
engine.
Piston ring compressor, 100 mm, No. 130530
Special Environmental Conditions
Materials/Parts
Well-ventilated area required for cleaning.
Dry cleaning solvent (Item 17, Appendix C)
Grease (Item 7, Appendix C)
Lubricating oil (Item 10, Appendix C)
REMOVAL:
CAUTION
When removing cylinder and shims,
make sure piston or connecting rods
do not knock against crankcase. This
could result in serious damage to
piston or connecting rod.
Remove cylinder (1), shims (2), and piston
(3) from top of crankcase (4). Match-mark
each cylinder and corresponding piston.
4-64
|
