|
| |
TM 5-4320-305-24
3-19.
REPLACE CYLINDER HEAD ASSEMBLY, ROCKER ARMS, PUSHRODS, AND TAPPETS (Continued)
2
Mount cylinder head (3) and intermediate ring (4) on cylinder.
3
Insert waisted bolts (5) and washers (6) in cylinder head (3).
4
Pretighten
waisted
bolts
(5)
alternately
and
evenly
across
cylinder
head
(3)
with
socket
spanner No. 120040/120050 (7) to
29. 50 ft-lb (40 N.m) torque. Using
torque gage No. 101900 (8), tighten
each bolt (5), crosswise, three
additional 45 degree increments;
then,
maintaining
crosswise
pattern,
tighten
each
bolt
an
additional 30 degrees.
5
Rotate crankshaft two complete
revolutions of 360 degrees.
6
Remove waisted bolts (5) and
washers (6). Mark and remove
cylinder
head(s)
(3)
and
intermediate rings (4).
3-105
|
