|
| |
TM 5-4320-305-24
3-18.
REPAIR ALTERNATOR, V-BELT PULLEY, AND FAN (Continued)
5
Place front bearing retainer (1) into recess of front
housing (2). Aline ears of front bearing retainer with
opening in front housing using a long nose pliers.
Exert pressure on front bearing retainer using a
wooden dowel, and lock edge of retainer in recess.
CAUTION
Do not press on outer race when installing rear bearing. Excessive
pressure on outer race may damage bearing.
6
Support pulley end of rotor on arbor press. Place rear bearing on end of shaft. Press rear bearing using a tool that
contacts only the inner race. Press rear bearing until inner race contacts shoulder of shaft.
CAUTION
Do not press on outer race when installing rotor to front housing.
Excessive pressure on outer race may damage front bearing.
7
Place rotor (1) on bed of arbor press, using two steel
blocks (2) for support. Place front housing (3) over
shaft. Using a driving tool that contacts only the inner
race of the front bearing, press front housing onto
shaft until inner race of front bearing contacts
shoulder of shaft.
3-95
|
