|
| |
TM 5-4320-305-24
3-16. REPAIR TURBOCHARGER (Continued)
10
Check that piston rings (17) are not pressed out of grooves. Be sure piston ring gaps are offset through 90 degrees
toward oil inlet.
11
Install preformed packing (16) on backplate (15).
12
Apply sealing compound to backplate (15) sealing face and to screw (14) threads.
13
Install backplate (15).
14
Tighten screws (14) to 20.65 ft-lb (28 N.m) torque.
3-78
|
