|
| |
TM 5-4320-305-24
3-15.
TEST/REPLACE FUEL INJECTORS (Continued)
INSTALLATION:
CAUTION
Use care when cleaning injector seat in cylinder head to prevent
scratches. Scratches will cause a carbon track.
1
Lightly coat graphite side of washer (1) with grease and
install on injector nozzle (2). Make sure graphite side
of washer points toward injector (3). Be certain injector
seat in cylinder head is clean. Make sure washer sticks
to nozzle during installation of fuel injector in cylinder
head.
2
Carefully insert fuel injector (1) into injector bore in
cylinder head (2). Make sure not to damage nozzle
needle (3). Insert injector until it seats properly at
bottom of bore in cylinder head.
3-70
|
