|
| |
TM 5-4320-305-24
3-13.
REPLACE FUEL INJECTION PUMP (Continued)
CAUTION
Do not drop the gear mounting hardware into the crankcase.
6
Install one bolt (1), lockwasher (2), and washer (3).
7
Remove two screws (10) and two washers (11).
8
Remove cover (12) and gasket (13) from fuel injection
pump (7).
9
Rotate crankshaft pulley until plunger for cylinder
number one (14) is at TDC. Secure crankshaft pulley
to hold in this position.
10
Place gasket (13) and cover (12) onto fuel injection
pump (7).
11
Install two screws (10) and two washers (11).
CAUTION
Do not drop the gear mounting hardware into the crankcase.
12
Remove bolt (1), lockwasher (2), and washer (3).
13
Rotate crankshaft until cylinder number one is at TDC. Secure crankshaft to hold in this position.
CAUTION
Do not drop the gear mounting hardware into the crankcase.
14
Install three bolts (1), three lockwashers (2), and three washers (3).
15
Release the crankshaft V-belt pulley.
ADJUSTMENT:
Adjust the fuel injection pump in accordance with paragraph 3-6.
3-64
|
