|
| |
TM 5-4320-305-24
3-10.
REPLACE/REPAIR OIL PAN ASSEMBLY
This task covers:
a. Removal
c. Repair
b. Cleaning/Inspection
d. Installation
INITIAL SETUP
Tools
Equipment
Condition
Shop set, automotive repair, field
Para
Condition Description
maintenance, basic
2-29
Oil drain assembly removed from
Materials/Parts
oil pan. Plywood board in place.
Diesel fuel oil (Item 6, Appendix C)
Special Environmental Conditions
Sealing compound (Item 15, Appendix C)
Well-ventilated area required for cleaning.
REMOVAL:
1
From the rear of the trailer, slide a plywood board, approximately 1/8 x 19 x 48 inches (3.2 x 482. 6 x 1219.2 mm)
between the oil pan and the fuel tank. Be sure the board does not rest on, crimp, or damage any fuel lines or
fittings. Place the board on top of the fuel tank to protect it from damage during removal of the oil pan.
2
Remove screws (1), washers (2), and
bushings (3) from the oil pan (4) and lower
the assembled oil pan onto the plywood
board.
3
Remove intermediate bottom (5) and upper
gasket (6) from the engine crankcase.
4
Slide oil pan (4) from under the engine.
Remove lower gasket (7) from oil pan (4).
3-50
|
