|
| |
TM 5-4320-305-24
3-6. REPLACE ENGINE ASSEMBLY (Continued)
2
Place sling under crankcase at blower end of engine assembly.
3
Put tension on sling and position spreader bar so that sling hangs vertically and does not crush components mounted
on engine. Make sure engine is properly supported.
4
Apply only enough lifting force to remove pressure from support bracket (3) and rear engine supports (4).
5
Remove bolts (5), washers (6), lockwashers (7), nuts (8), bolts (9), and nuts (10) from engine supports (4). Remove
engine supports from support bracket (3) and from the trailer.
3-21
|
