|
| |
TM 5-4320-305-24
3-4. REPLACE/REPAIR PUMP ASSEMBLY (Continued)
DISASSEMBLY:
1
Remove nuts (1) and lockwashers (2).
2
Matchmark pump body (3) and seal housing (4) to aid in assembly. Remove pump body (3) with studs (5).
3
Remove and discard gasket (6).
4
Remove wear ring (7) from pump body (3) and discard.
5
Remove impeller (8).
6
Remove shaft seal (9) spring and rotating seal half and discard. Remove stationary seal half from seal housing and
discard.
7
Remove shaft sleeve (10).
8
Remove wear ring (11) from seal housing (4) and discard.
9
Remove nuts (12) and lockwashers (13).
10 Remove seal housing (4).
11 Set bearing housing assembly (14) aside.
3-10
|
