|
| |
TM 5-4320-305-24
2-45. REPLACE/REPAIR WHEEL BRAKES (Continued)
13
Install angle bracket (1) and cable (2) with two cap
screws (3), two hex nuts (4), and two lockwashers
(5).
14
Slide one end of crossmember (6) through slide
(7) and secure other end to frame (8) with
shoulder bolt (9), nut (10), and lockwasher (11).
15
Install J-bolt (12) on crossmember (6) with hex nut
(13) and cotter pin (14).
16
Connect brake cable (2) to J-bolt (12).
17
Install hand brake (1) on frame (2) with two
mounting bolts (3), two nuts (4), and two
lockwashers (5).
18
Connect hand brake cable (6) to crossmember
and hand brake (1).
2-180
|
