|
| |
TM 5-4320-305-24
2-44. REPLACE/REPAIR TRAILER BRAKE (Continued)
13
Remove 14 bearings (1) from inner slide assembly.
14
Remove push rod block (3) from inner slide assembly (2).
INSPECTION/REPAIR:
1
Inspect master cylinder for signs of leaking brake fluid, broken seals, damaged threads, or damaged casing.
Inspect rubber boot for cracking. Replace if damaged.
2
Inspect gasket and weather seal for cracking. Replace if damaged.
3
Inspect front roller bolt, two main roller pins, and two front roller pins for signs of uneven wear, burrs, or cracks.
Replace if damaged.
4
Inspect push rod block for warpage, bending, or cracks. Replace if damaged.
5
Inspect two dampers for signs of uneven wear at pin bores. Inspect damper sliding rods for scoring or pitting.
Replace if damaged.
6
Inspect all nuts, bolts, lockwashers, and cotter pins for cracks, damaged threads, or severe corrosion. Replace if
damaged.
7
Inspect 14 bearings for uneven or heavy wear. Replace if damaged.
2-166
|
