|
| |
TM 5-4320-305-24
2-42. REPLACE FUEL TANK LINES AND FITTINGS
This task covers:
a. Removal
d. Bleeding
b. Inspection
Fuel System
c. Installation
INITIAL SETUP
Tools
General Safety Instructions
Shop equipment, automotive maintenance
and repair, common no. 1
Engine cool.
Tool kit, general mechanics automotive
Well-ventilated area.
Personnel Required
Mechanic 44B20 (2)
REMOVAL:
WARNING
Death or serious injury could occur if diesel fuel oil is not handled
carefully. Use in a well-ventilated area away from open flame,
arcing equipment, ignition sources, heaters, or excessive heat.
Always store fuel in proper, marked containers. DO NOT SMOKE.
1 Remove engine side panel.
2 Loosen two hose clamps (1).
3 Tag and remove fuel line (fuel tank-to-3-way selector valve) (2).
4 Loosen and remove male connectors (3).
5 Loosen hose clamps (4).
6 Loosen and remove male connector (5) and banjo bolt (6).
7 Tag and remove fuel line (3-way selector valve to fuel feed pump) (7).
8 Loosen and remove banjo bolt (8).
9 Loosen hose clamp (9).
10 Tag and remove fuel return line (10).
11 Tape over exposed fuel ports and lines so that contaminants do not enter the fuel system.
2-156
|
