|
| |
TM 5-4320-305-24
2-36. REPLACE EXHAUST MANIFOLD AND SUCTION PIPE (Continued)
5 Slide intake manifold (18) end into rubber sleeve (21), and place intake manifold (18) on studs (17). Secure intake
manifold (18) with nuts (15) and washers (16).
6 Position rubber sleeve (21) so it is on each pipe end equally. Securely tighten hose clips (20) at each end of sleeve
(21).
7 Connect ether line to suction pipe (9).
8 Install compression rings (7) and assemble two exhaust pipes (13 and 18).
9 Install new mounting studs (12 and 17) in the engine block as required.
10 Place new gaskets (14 and 19) and the exhaust manifold (1) on studs (12 and 17); secure with nuts (10 and 15) and
washers (11 and 16).
11 Install exhaust pipe and exhaust elbow in accordance with paragraph 2-28.
12 Install turbocharger in accordance with paragraph 2-33.
2-139
|
