|
| |
TM 5-4320-305-24
2-35. TEST/REPLACE ALTERNATOR, ALTERNATOR V-BELT PULLEY, AND FAN (Continued)
INSTALLATION:
1 Connect wire lead (6) which has a push-on connector. Install voltage regulator (4) onto alternator (5) using three
screws (3).
2 Connect two wire leads (2) to alternator (5) as tagged during removal. Install two nuts (1).
3 Aline alternator (9) with front cover mounting hole. Support alternator and secure with hex head
bolt (11), damping bushes (12), washers (13), and nut (14) to alternator mounting bracket (15). Tighten nut only hand
tight.
4 Install clamping plate (10) on alternator (9) with clamping plate screw (7) and washer (8). Tighten only hand tight.
5 Install key (6) in shaft (1).
6 Install fan (5) onto shaft (1) over key (6) with fan blades toward alternator (9).
7 Install alternator V-belt pulley (4) onto shaft (1) over key (6).
8 Install nut (2) and lockwasher (3). Tighten securely.
2-134
|
