|
| |
TM 5-4320-305-24
2-33. REPLACE TURBOCHARGER AND EXHAUST (TURBINE) ELBOW (Continued)
10 Install new preformed packing (21) in the front
cover oil port. Secure cover (18) in place with
three bolts (19) and three washers (20).
11 Install sleeve (17) and one pipe clip (16) on the
tube of cover (18). Do not tighten pipe clip.
12 Install new gasket (14) on the turbocharger oil
outlet port.
13 Using two screws (12) and washers (13), secure
the turbocharger end of oil return pipe (15) to the
turbocharger oil outlet.
14 Slide second pipe clip (16) and the free end of
sleeve (17) onto oil return pipe (15). Position the
sleeve equally on the pipe and tube ends. Tighten
both pipe clips (16) securely.
2-126
|
