|
| |
TM 5-4320-305-24
2-33. REPLACE TURBOCHARGER AND EXHAUST (TURBINE) ELBOW
This task covers:
a. Removal
c. Operational Check
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Shop equipment, automotive maintenance
Para
Condition Description
and repair, common no. 1
2-26
Air intake elbow removed.
2-28
Exhaust (pipe) elbow removed.
Tool kit, general mechanics automotive
Materials/Parts
General Safety Instructions
Unit cool.
Lubricating oil (Item 10, Appendix C)
REMOVAL:
WARNING
Handling hot exhaust system can cause severe burns. Allow unit to cool before handling.
1 Unthread bolt (1) and remove two washers (2) and
the bolt end of the turbocharger-to-filter lube oil
pipe (3).
2
Remove two bolts (4), two washers (5), and gasket
(6) from the turbocharger end of the pipe (3).
Discard gasket.
3
Remove three screws (7), three washers (8), three
rings (9), three pipe clips (10), and three end plates
(11) to remove pipe (3) from the engine.
2-123
|
