|
| |
TM 5-4320-305-10
Table 2-2. Preventive Maintenance Checks and Services - Continued
B - Before Operation
D - During Operation
A - After Operation
W - Weekly
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE
Equipment is Not
NO
B
D
A
W
Ready/Available If:
38
•
•
Starter Assembly (1).
There is evidence
of arcing, over-
Visually inspect wires for loose ring terminals (2), loose
heating, binding,
connection at starter posts (3), burn marks at connections
or cracking.
(arcing), corrosion of ring terminals (2) or starter posts (3),
damaged wire insulation (4), burned or melted insulation
(4) (overheating), and frayed or worn spiral wrap tubing (5).
Visually inspect starter (6) for loose mounting screws (7).
39
•
Air Cleaner Assembly (7).
Check air cleaner restriction indicator (2). If red band
appears in window, press and release reset button. If red
band reappears, refer to Table 3-1, Troubleshooting.
2-52
|
