|
| |
TM 5-4320-305-10
Table 2-2. Preventive Maintenance Checks and Services - Continued
B - Before Operation
D - During Operation
A - After Operation
W - Weekly
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE
Equipment is Not
NO
B
D
A
W
Ready/Available If:
28
•
•
Fuel Tank Assembly.
Lines are not se-
cure, are con-
taminated or
WARNING
there is fuel
leakage. Class
III fuel leaks
Death or serious injury could occur if diesel
or fire hazard
fuel oil is not handled carefully. Use in a
leakage are
well-ventilated area away from open flame,
found.
arcing equipment, ignition sources, heaters, or
excessive heat. Be certain that fuel lines and
connections are secure. Do not inhale vapor.
Do not overfill fuel tank. Engines must be
turned off and cooled before re-fueling. Use
proper refueling procedures and equipment to
avoid spillage. Do not run engines near open
fuel containers. DO NOTSMOKE.
Check fuel tank strainer (1 ) for dirt.
CAUTION
Condensed moisture in the fuel tank is harmful
to engine operation. Keep fuel tank filled
between
periods
of
operation
to
reduce
condensation.
Inspect fuel tank (2) for loose screws (3) or nuts (4), and
for dents, leaks, and other damage.
Visually check fuel tank (2) for physical damage that
could cause leaks or contamination of fuel supply.
2-43
|
