|
| |
TM 5-4320-305-10
Table 2-2. Preventive Maintenance Checks and Services
NOTE
If the equipment must be kept in continuous operation, check and service only those items that
can be checked and serviced without disturbing operation. Make the complete checks and
services when the equipment can be shut down.
Perform weekly as well as before operation PMCS if:
(1) You are the assigned operator and have not operated the
item since the last weekly.
(2) You are operating the item for the first time.
Within designated interval, these checks are to be performed in the order listed.
B - Before Operation
D - During Operation
A - After Operation
W - Weekly
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE
Equipment is Not
NO
B
D
A
W
Ready/Available If:
Trailer Assembly.
1
•
Frame (1)
Cracks are detected
or engine
Check that the following components are securely
or pump and
mounted to the trailer frame and that attaching areas
bearing housing
are free of corrosion and damage:
assembly are
loose.
Leveling legs warning plate (2)
Transportation plate (3)
Identification plate'(4)
Pump mount beam (5)
Fuel tank straps (6)
Engine (7)
Battery box (8)
Tool box (9)
Visually inspect all trailer frame welds for cracks.
inspect only those welds that can be seen without
disassembly.
Check that plates can be read.
Leveling leg warning plate (2)
Pump identification plate (4)
Transportation plate (3)
2-14
|
