|
| |
TM 5-4320-304-14
TM 08922A-14/1
4-21. REPLACE/ADJUST THROTTLE CONTROL
This task covers:
a. Removal
c. Adjustments
b. Installation
INITIAL SETUP
Tools
Equipment Condition
(A) TooI kit, general mechanics automotive
(USMC) TooI kit, general mechanics
Engine shut down.
REMOVAL:
1
2
3
4
5
6
7
Remove nut (1), disc (2), and nut
Remove lever (4).
Loosen nuts (5 and 6). Unscrew
angular joint (7) from adjusting
screw (10).
Remove nut (8). Unscrew angular
(9) from adjusting screw (10).
(3).
joint
Remove nut (11), disc (12), and spring
washer (13).
Remove hand lever (14), lever (15), and
screw (16).
Remove two screws (17), two discs
(18), two nuts (19), and two fixing
flaps (20).
Remove two screws (21). Remove con-
sole (22) and two discs (23).
INSTALLATION:
1
2
3
4
5
6
Install
Install
Install
Install
Install
Install
two discs (23) and console (22).
two screws (21). Tighten securely.
two screws (17), two discs (18), two nuts (19), and two fixing flaps (20).
screw (16) into console (22).
lever (15) on screw (16).
hand lever (14) on screw (16) and engage tang on hand lever (14) with notch on lever (15).
4-36
|
