|
| |
TM 5-4320-304-14
TM 08922A-14/1
4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES, AND FITTINGS (Continued)
3 Check non-return valve by shaking for free movement of internal valve ball. If necessary, clean
with fuel. If internal valve ball does not have free movement, replace non-return valve.
INSTALLATION:
Death or serious injury could occur if fuel is not handled
carefully. Use in a well-ventilated area away from open
flame, arcing equipment, ignition sources, heaters, or exces-
sive heat. Always store fuel in proper, marked containers.
DO NOT SMOKE.
1
Install fuel pressure line (1) on injection pump (3)
and injector (2).
2
Install fuel hose (1) (double ring piece to
injector) on double ring piece (2).
3
Install fuel hose (1) (injection pump
to double ring piece) on double ring
piece (2).
4-27
|
