|
| |
TM 5-4320-304-14
TM 08922A-14/1
4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES, AND FlTTlNGS
This task covers:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP
Tools
GeneraI Safety Instructions
(A) Tool kit, general mechanics automotive
Unit must be cool. Fuel tank must be empty.
(USMC) Tool kit, general mechanics
Materials/Parts
Diesel fuel oil (Item 2, Appendix E)
Well-ventilated area required.
REMOVAL:
1
2
3
4
5
Death or serious injury could occur if fuel is not handled
carefully. Use in a well-ventilated area away from open
flame, arcing equipment, ignition sources, heaters, or exces-
sive heat. Engines must be turned off and cool before re-
fueling. Use proper refueling procedures and equipment to
avoid spillage. Do not run engine near open fuel containers.
Always store fuel in proper, marked containers. DO NOT
SMOKE.
As each fuel hose, connection, or connection port is re-
moved, be sure to tape over or plug each open connection
to prevent contaminants from entering fuel system.
Remove screw (1), spacers (2), and clamp (3).
Remove fuel filter (4) from fuel hose (5) (lift
pump to fuel filter).
Remove fuel filter (4) from fuel hose (6) (fuel
filter to injection pump).
Discard fuel filter (4) and tape or plug fuel hoses
(5 and 6).
Remove fuel hose (5) from lift pump discharge
fitting.
4-24
|
