|
| |
TM 5-4320-304-14
TM 08922A-14/1
6-4. REPAIR/REPLACE TIMING COVER AND CAMSHAFT
This task covers:
a. Removal
c. Disassembly
e. Assembly
b. Cleaning
d. Repair
f. Installation
INITIAL SETUP
Tools
Materials/Parts
Shop set, automotive repair,
field maintenance, basic
Auxiliary bush, timing cover oil seal
(30 x 47 mm)
666
075
00
Extractor, cam follower spindle
666
324
00
Mounting device, camshaft needle bearing
666
418
00
Punch, camshaft needle bearing
666
425
00
Diesel fuel oil
Equipment
Condition
Para
(Item 2, Appendix E)
Condition Description
4-18
Lift pump removed.
5-8
Injection pump removed.
5-9
Crank handle and gears removed.
6-3
Connecting rod removed from
engine.
General Safety Instructions
Well-ventilated area required.
REMOVAL:
1
2
Lift both cam followers from camshaft when removing
timing cover to prevent bending by cam points.
Remove six screws (1) and joints (2) and remove timing cover (3) and camshaft (13).
NOTE
Insertion of Allen screws in timing cover holes may aid in
removal of timing cover.
Matchmark two teeth of camshaft gear and one tooth of crankshaft gear to make sure of proper
alignment of gearing when reinstalling timing cover.
6-10
|
